maximum load: 12 t
limited production of custom design scissor lifts
made to customer's requirements and in small production runs
carrying capacity, power source, environment, space requirements - we can fulfil your wishes and requirements
with Mecanum drive
Caterpillar aerial platform with a working height of 10.50 m. The highest model of the caterpillar platform series and at the same time a customer favourite. Despite its high working height it has small dimensions and the SAB AR-102 caterpillar platform can pass through doors or narrow passages. The tread width is widened hydraulically to 1.30 m once the caterpillar platform has been positioned, which is how the SAB-AR 102 provides stability and safety while in use.
Working height up to 10.5 m / Platform size: 0.78 m x 1.9 m / Carrying capacity: up to 200 kg
Caterpillar platform with caterpillar treads combined with manoeuvrability, small dimensions and lightness.
Wide range of uses in and outdoors even in hard to reach areas.
This caterpillar platform has been designed especially for use on gym and hall surfaces. Due to the low point load and the non-marking treads work can be performed in a very short time with this caterpillar platform. This is a big advantage especially when normal operations are in progress!
Working in limited space, extreme working heights, larger working platforms, special platform surfaces that the larger point loads of scissor lifts cannot withstand. Weiss GmbH technology for conveyor and hoisting systems produces small series of aerial platforms that are tailored to your needs.
The use of aerial platforms on surfaces that cannot withstand the point loading of conventional devices can be made a reality with caterpillar platforms. The caterpillar aerial platforms with their weight-distributing caterpillar treads are used particularly indoors on gym floors or even special stone coverings. The special abilities of the caterpillar aerial platform are also put to good use when crossing rough terrain.
Specific work environments take their toll on everything, including the equipment. The different safety standards in use must also be applied to the scissor lifts or transport devices. This may involve special temperature ranges or fluctuations, cleanroom environments or requirements regarding collision protection or explosion control standards.
In all areas of production the dimensions are designed to ensure optimal use of production factors. For example, with warehouse logistics the priority is using the available space in the best possible way - and this affects the requirements regarding vehicles, aerial platforms or transport equipment. Whether guided by rails, sensor-controlled or with a low turning radius - we will find an appropriate solution for our customers!
| Arbeitshöhe der Raupenbühne | 10,6 m |
| A.Plattform ausgefahren | 8,6 m |
| B.Plattform eingefahren | 1,36 m |
| C.Plattform – Geländerhöhe | 1,1 m |
| D.Durchfahrtshöhe der Raupenarbeitsbühne | 2,46 m |
| E.(Geländer heruntergeklappt) | 2,00 m |
| F.Plattformgröße | 0,83 m x 1,9 m |
| G.Plattformerweiterung | 0,8 m |
| H.Gesamtbreite/H1 | 0,83 m/1,3 m |
| I.Gesamtlänge/ mit Abst.(1) | 2,10 m/2,40 m |
| J.Standfläche je Seite | 1,6 m x 0,23 m |
| K.Bodenfreiheit der Raupenarbeitsbühne | 80 mm |
| Tragfähigkeit Innenbereich | 200 kg, 2 Pers. |
| Tragfähigkeit Außenbereich | 200 kg, 1 Pers. |
| Tragfähigkeit der ausschiebbaren Plattform | 200 kg |
| Maximale Neigung | 2,0 Grad |
| Gesamtgewicht/mit Abst. | 1.890 kg/2.040 kg |
| Hebe-/Senkzeit | 50/39 sec. |
| Geschwindigkeit, eingefahren | 0 – 4 km/h |
| Geschwindigkeit, ausgefahren | 0 – 1 km/h |
| Steigfähigkeit der Raupenbühne | 100 %/45 Grad |
| Steuerung | proportional |
| Antrieb | elektr./hydr. |
| Wenderadius innen/außen | 360 ° |
| Gummikette | 230/72/56 |
| Batterie 24 V (8x6 Volt DC) | GiS 200 Ah/5h, GiS 240 Ah/20h |
| Batterieladegerät | 30 A |
| Optional | Hydraulische Abstützung für Geländeeinsatz |
(1) Länge inklusive Leiter
(2) max. Steigfähigkeit nur mit Sicherung der Maschine
| SAB AR-66 |
| SAB AR-78 |
| SAB AR-90 |
| SAB AR-102 |
| Scissor lifts |
Lighting // Collision protection systems // Anti-slip coatings // Special driving systems // Cleanroom requirement // Explosion control // Extreme temperature conditions // Lightweight construction // Compressed air and power supply
