maximum load: 12 t
limited production of custom design scissor lifts
made to customer's requirements and in small production runs
carrying capacity, power source, environment, space requirements - we can fulfil your wishes and requirements
with Mecanum drive
A scissor lift with all the advantages of the B series - a robust design with high carrying capacity for work at almost 10 m height.
Working height up to 9.9 m / Platform size: 1.14 m x 2.5 m / Carrying capacity: 500 kg
Robust design - high carrying capacity over the entire length of the platform!
Safe and comfortable working indoors and outdoors!
No scaffolding - no ladder. Efficient and productive for working comfortably at great heights!
Working in limited space, extreme working heights, larger working platforms, special platform surfaces that the larger point loads of scissor lifts cannot withstand. Weiss GmbH technology for conveyor and hoisting systems produces small series of aerial platforms that are tailored to your needs.
The use of aerial platforms on surfaces that cannot withstand the point loading of conventional devices can be made a reality with caterpillar platforms. The caterpillar aerial platforms with their weight-distributing caterpillar treads are used particularly indoors on gym floors or even special stone coverings. The special abilities of the caterpillar aerial platform are also put to good use when crossing rough terrain.
Specific work environments take their toll on everything, including the equipment. The different safety standards in use must also be applied to the scissor lifts or transport devices. This may involve special temperature ranges or fluctuations, cleanroom environments or requirements regarding collision protection or explosion control standards.
In all areas of production the dimensions are designed to ensure optimal use of production factors. For example, with warehouse logistics the priority is using the available space in the best possible way - and this affects the requirements regarding vehicles, aerial platforms or transport equipment. Whether guided by rails, sensor-controlled or with a low turning radius - we will find an appropriate solution for our customers!
| Arbeitshöhe der Scherenbühne | 9,9 m |
| A.Plattform ausgefahren | 8,0 m |
| B.Plattform eingefahren | 1,2 m |
| C.Plattform – Geländerhöhe | 1,1 m |
| D.Durchfahrtshöhe | 2,30 m |
| E.(Geländer heruntergeklappt) | 1,90 m |
| F.Plattformgröße | 1,14 m x 2,5 m |
| G.Plattformerweiterung | 1,0 m |
| H.Gesamtbreite der Arbeitsbühne | 1,18 m |
| I.Gesamtlänge (1) | 2,6 m |
| J.Radstand | 1,96 m |
| K.Bodenfreiheit der Scherenbühne | 145 mm |
| Lochfahrschutz ausgefahren | 20 mm |
| Tragfähigkeit Innenbereich | 500 kg, 2 Pers. |
| Tragfähigkeit Außenbereich | 240 kg, 2 Pers. |
| Tragfähigkeit der ausschiebbaren Plattform | 500 kg |
| Maximale Neigung | 2 Grad |
| Gesamtgewicht der Scherenbühne | 2.694 kg |
| Hebe-/Senkzeit | 30/32 sec. |
| Geschwindigkeit, eingefahren | 0 – 4 km/h |
| Geschwindigkeit, ausgefahren | 0 – 1 km/h |
| Steigfähigkeit | 25 % |
| Steuerung | proportional |
| Antrieb | E-Heckmotor 2x1,7 kW |
| Wenderadius innen/außen | 87 ° |
| Bereifung – Größe/Art | 405 mm x 130 mm, nicht markierend |
| Batterie 24 V (4x6 Volt DC) (B 137 mit 8x6 Volt DC) | GiS 200 Ah/5h, GiS 240 Ah/20h |
| Batterieladegerät | 30 A |
(1) Länge inklusive Leiter
| SAB B-80 |
| SAB B-99 |
| SAB B-118 |
| SAB B-137 |
| SAB B-137 L (Light) |
| Scissor lifts |
Lighting // Collision protection systems // Anti-slip coatings // Special driving systems // Cleanroom requirement // Explosion control // Extreme temperature conditions // Lightweight construction // Compressed air and power supply
